“Framecro” – Fast Framing on the Cheap!

Framing artwork used to be a dreaded task, but over the years I’ve come to really enjoy it. This is especially true as we start 2020 because I recently had 4 dog related pieces accepted to an Austin art show at Art for the People gallery called Celebrities – Pet & People Portraits. Future posts this week will provide more details about the show and the inspiration behind the pieces, but I wanted to share some creative custom framing ideas I used with 2 of the pieces in the show.
One of the troubling issues with framing is the commitment, secondarily the cost and complexity. The process of “properly” framing a painting often involves sealing it inside a frame in a way that makes getting it out an ordeal. When I hang finished art in my home, I can easily get bored of the frame after a year, or simply want to change the art that’s in the frame. To solve this problem, I came up with a Velcro based solution that works great with small pieces in floater frames, whereby you affix the piece with Velcro instead of glue or some other fixative, which allows you to swap out pieces in the same frame. This is handy for your personal art at home, gallery shows or events.
The steps to frame using Velcro, a process I’ve trademarked as “framecro“, are very simple, fast, and inexpensive. Let me know if you opt to framecro any of your paintings; improvements to the process are always welcome.
  1. Most Velcro types will work, but the Command line of snap-type from 3M is what I prefer. They market it as a picture hanging velcro because it snaps together very tightly, but you can still pull it apart easily.
  2. Cut 4 twin sets of velcro rectangles, which means you have 8 total rectangles of Velcro. These should be relatively small and easily fit into the 4 corners of the frame.
  3. Affix the velcro to the corners of the frame and the corners of the back of the artwork.
  4. Align the artwork and press it onto the frame.

You’re done! If you want to swap out a piece, just pop out the existing piece of art and press in a new one that has Velcro in it’s corners.

The $250 Eraser

I wanted to share an expensive lesson I learned today in hopes that nobody reading this post will be doomed to repeat. For the artists out there, you’ll probably just laugh at this post, as you’ve surely experienced your own “eraser gate”, but if not, read on and take caution.

I’ll cut to the point and back into the details. If you leave a vinyl eraser sitting on a wooden table, it will MELT THE LACQUER FINISH!

I had been drawing in my studio and left my eraser and pencils sitting on the table afterwards. I then got distracted, for many weeks, with other painting interests and didn’t return to the drawing for awhile. When I finally got around to finishing the drawing, I grabbed the eraser and it was stuck to the table! Upon closer inspection, it had actually melted / dissolved the lacquer finish into a gooey mess all the way down to the bare wood. See the picture below to appreciate the damage.

Eraser Burn Zoomed

I finally found a furniture repair company that does house calls and luckily they were able to do a suitable spot repair, which meant that vinyl eraser ultimately cost $250. Like I said, it was a very pricey lesson.

My understanding is that erasers (most but not all) will chemically react with their surroundings over time, so you have to be careful how they’re stored. The $250 eraser I used was vinyl, similar to this one at Jerry’s Artarama, but I believe this can happen with rubber and kneaded erasers, too. My erasers are now stored in their own canvass bag or wrapped in Saran Wrap. Hopefully I’ve seen the last of eraser meltdowns.